Build part parameters · child group grp_layer_skip of every contour type, every hatch group and the wall supports
Layer skip
Not every vector type has to be exposed on every layer. The layer skip exposes a vector type
only on every n-th layer; on the other layers it produces no paths at all. The layer offset chooses which
layers those are, so different vector types can take turns.
In Advanced Toolpath Utility
Try it yourself
Open the parameter profile of your part (Open Profile in the Exposure Preview), expand First border
(beam compensation) › Layer skip and set Expose every n-th layer to 2. Rebuild and step through a
few layers: the border is only drawn on every second one.
The part outline is drawn in red as well, so the video hides the original and preprocessed part (left bar of
the Exposure Preview) and zooms to the edge. The demo also counts the border paths from the toolpath data: 96
edges on every layer before the change; with n = 2 only on layers 101 and 103, with offset 1 only on 100 and
102. The demo part parts/hull_cylinder.stl is generated by tools/make_parts.py.
Try it
first border (BSID 100)volume hatch (BSID 500)
Every n-th layer
The drawing is a cut through 16 layers of the cylinder from the video: the border at both walls, the hatch in
between. With Expose every n-th layer = 2 the border is exposed on every second layer and missing on
the others. A skipped vector type produces nothing on that layer, not a thinner or weaker path.
The offset
A layer is exposed if layer index − offset is a multiple of n. The index counts from 0 at the lowest
layer of the part, so ATU's layer 101 is index 100. With n = 2 and offset 0 the border is on layers 101 and
103; offset 1 moves it to 100 and 102, as in the video. Offsets of n or more repeat: with n = 2, offset 3 is
the same as offset 1.
Taking turns
Give two vector types the same n and different offsets, and they alternate: try border and hatch both on
every second layer, with offsets 0 and 1. The explainer warns when a layer is left without any exposure.
Exposing a vector type less often saves time and heat, but the powder layers in between are then
melted together with the next exposure: the energy has to be raised for it. For the core of a part, Hull and
core has its own setting, Expose core every n-th layer; for supports see
Wall supports.
Parameters
Parameter
Default
Meaning
Expose every n-th layer
1 (1–100)
1 = every layer, 2 = every second layer, …
Layer offset
0 (0–99)
Index of the first exposed layer; taken modulo n.
The group exists under First border, Following borders, Fill contours, every hatch group (Volume, Core,
Downskin, Upskin, Support hatching) and Wall supports, each with its own two values.
In the code
Follow the two values from the dialog to the decision for one layer in How the code
works, and change the defaults yourself with the recipes below.
How the code works
Five steps from the dialog to the paths of one layer. Scroll through them: the drawing on the
left shows what each piece of code does. Highlighted lines are the ones the text talks about; the file names link
to the source.
first bordervolume hatch
Change it yourself
How to try a code change
Work on a copy or a git branch of the buildstyle project.
Open the project folder in an editor such as VS Code. ATU writes jsconfig.json and type
declarations into the folder, so the editor can offer code completion.
Make the edit, save, compile the project in ATU and rebuild the exposures.
Check the result in the Exposure Preview or the 3D View, like in the video above.